Kalkulora

Paint calculator

Find the wall area from your room size, deduct doors and windows, and work out how much paint and how many cans you need for the number of coats.

How will you enter the area?

How it is calculated

  1. Wall area: total wall length (room perimeter) × wall height, minus doors and windows, plus the ceiling if you paint it.
  2. Paint: area × coats ÷ coverage per coat, plus any waste allowance.
  3. Cans: paint needed ÷ can size, rounded up; the leftover is shown too.

In imperial mode, coverage in ft² per US gallon is converted to m² per litre (1 ft² = 0.09290304 m², 1 US gal = 3.785411784 L). Rough or porous surfaces such as new plaster absorb more paint than the label suggests; add 5–10%.

Frequently asked questions

How much paint do I need for a room?

Multiply the area to paint by the number of coats and divide by the coverage on the can. For 40 m² of wall, two coats and paint that covers 10 m² per litre, you need 8 litres. In US units, 400 ft² × 2 coats ÷ 350 ft² per gallon = 2.29 gallons.

Where do I find the paint coverage?

On the can or the product data sheet, usually as m² per litre or square feet per gallon for one coat. It depends on the paint and the surface, so the calculator asks for the figure on your product instead of assuming one.

Sources

Last updated:

Estimate only; real usage depends on the surface, colour change and application method. Use the coverage on your product’s data sheet.